March 28, 2024

SCR331 Smart Card Reader – 5.25 Firmware Update & Windows 7

I have been doing some reorganizing lately, and I ran across a “broken” Smart Card reader.

It was “broken” because it would not work in Windows Vista.  Personally, I wouldn’t consider “not working in Vista” a reason for something to be “broken.”

Really Broken?
So I began to look deeper into this “broken” SCR, and see what the deal was.  It is a SCM Microsystems SCR331.

From the above link, it would appear that they still support the SCR331.  So I looked at the support page for some Windows 7 x64 drivers.  I found one here:
http://www.scmmicro.com/support/pc-security-support/downloads.html

I chose the appropriate download (for Windows 7 x64) to get started.

So I’ve got the drivers… I must be good to go.

Broken?
Well, I connected the SCR to my system, pointed to the drivers, and voila!

Nothing.

Maybe this darn thing is broken.  Maybe Windows 7/Vista just can’t use it.

No way… Why are there drivers to use it, when it isn’t “supported?”

Trial and Error
So I fired up a Windows XP VM, loaded the drivers and voila! It worked.  Alright, something is a little strange here.

Then I noticed something… Looking at the downloads page for Windows 7 x64 and Windows XP I noticed something very different between the two.

Look at the firmware section from the download page for Windows 7 x64
Then look at the firmware section from the download page for Windows XP (32bit)

So… There is a firmware update for the device.  Good to know.  Maybe that’s the fix.

Updating the Firmware
I figured that this wouldn’t work in Windows 7 x64, but what the heck, the SCR was “broken” anyway.

Upon downloading and extracting the .zip file, I ran the included FwUpdate.exe to begin the upgrade process.  Surprisingly, no compatibility issues, and it ran without issue.

My firmware was at version 1.40, and this package 5.25.  Afterward, the SCR was fully patched to 5.25.

And then afterward:


I added the appropriate drivers to Windows 7 x64, and voila! It worked.

Moral To The Story
I know that these devices are not that expensive, a Google Shopping search lists them around $15 each.

I can only imagine how many of these have been discarded by various entities, because they “didn’t work” with Windows Vista/7. So it would cost an organization with 100 of these, about $1500 to replace them with a similar “supported” device if the prices were comparable.

In short, before something is discarded, be 100% certain is isn’t going to work.  It could cost you in the long run.

Now maybe I can see if I can get it to work with VMware View… I guess I’ll start with Jason Langone’s post: How to Configure VMware View 4.5 with US Department of Defense CAC Authentication.

10 thoughts on “SCR331 Smart Card Reader – 5.25 Firmware Update & Windows 7

  1. Do you still have the software for the SCR331? I am having problems getting my SCR331 to work in windows.

    1. I no longer have a need for the SCR331, so I don’t. The site was updated, but the last time I looked, I was able to find it with some digging.

      I’ll see if I can find it and let you know.

  2. I troubleshot this for a long time 3 hours to be exact. Didn’t want to scrap my old reader. Anyways, the site is now http://support.identive-group.com/dfu_fw.php?lang=en . They don’t tell you a whole lot and wont make it specific about scr-331. I used trial and error. The firmware update for SCR3340 ExpressCard54 SmartCard V5.25 worked for me. Hope this helps.

  3. I tried multiple firmware updates including the one above and when I try to do the update I keep getting “no usb smart reader installed.”

    Under devices it does show that the “USB smart car reader” is installed though.

    Any help would be appreciated. Thanks.

  4. If your using a Vbox, you have to go to the menu for your host MAC OS and select devices and then USB and the SCM card reader. then on the XP guest OS, after the firmware upgrade enters DFU mode it’s waiting for you to select kind-of the same devices then USB and SCM card reader DFU mode, not the regular SCM card reader in the same menu. after that I had firmware the updated firmware 5.25. then I had to select again the regular SCM card reader. unless you want to use it on the host mac, then just shutdown the XP Guest OS.

Leave a Reply to Lance Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.