Jase's Place

Looking for an alternative (free) Connection Broker solution I stumbled across Crossroads.

It is a little application that will run on pretty much any current Linux/OSX build, and will load balance specific IP’s, ports.

Just because I wanted something quick and easy to test this on, I downloaded Ubuntu Desktop 6.0.6 LTS to try it out on.

Download Crossroads here. I chose the 1.48 build, as it is the latest stable (at the time of this writing).

So, download it, to your Linux system, and unpack it, and install it.
I downloaded/copied it to /tmp, and installed it as follows:

Unpacking the archive
root@ubuntu:/tmp# gunzip crossroads-stable.tar.gz
root@ubuntu:/tmp# tar –xvf crossroads-stable.tar
root@ubuntu:/tmp# cd crossroads-1.48

Compiling/Installing Crossroads
(make sure you have a C compiler like gcc installed)
root@ubuntu:/tmp/crossroads-1.48# make install
root@ubuntu:/tmp/crossroads-1.48# touch /etc/crossroads.conf

Basic Configuring of Crossroads
edit /etc/crossroads.conf (with the below configuration)

service rdp {

port 3389;

revivinginterval 15;

backend one {

        server 10.1.1.100:3389;

        maxconnections 1;

        setserverheader "X-Real-IP: %r";

        trafficlog /tmp/backend.1.log;

       }

backend two {

        server 10.1.1.101:3389;

        maxconnections 1;

        setserverheader "X-Real-IP: %r";

        trafficlog /tmp/backend.2.log;

        }

}

I set the "maxconnections" to 1, because if I have XP/Vista desktops on the backend, I don't want someone attempting to connect to one that already has an active connection.

Starting Crossroads
/usr/local/bin/crossroads start

Checking the status of Crossroads
/usr/local/bin/crossroads status

Stopping Crossroads
/usr/local/bin/crossroads stop

Keep in mind, this is just a rudimentary implementation of Crossroads in a Connection Broker capacity.

The Crossroads documentation gives more parameters and information to have it start automatically at different run levels, allowed from/denied from, etc.

Additionally, the default Makedef.def is setup for a maximum of 20 connections. So, before you compile it, adjust the number accordingly.

The config file (/etc/crossroads.conf) also has many additional settings, that can customize the connections, including things such as allowed/denied addresses, etc.

The Web Interface
There is also a web gui that will display connections/etc.
To start it up, run /usr/local/bin/crossroads-mgr start PORT

So if you run /usr/local/bin/crossroads-mgr start 80, you should see something like this:



Now, in a production environment, I'd recommend creating a hardened Linux VM, and really tweaking /etc/crossroads.conf to get the best performance and security.

This could be a really viable solution in a small environment where costs play a significant factor.

As can be seen it really isn't hard to do, doesn't take long, and (by reading the docs) can be locked down enough to be a cheap (free) solution.

Labels: VMware

This entry was posted on 17 August 2007 at 6:00 AM. You can skip to the end and leave a response.